Aging in place bathroom remodel in the Twin Cities
Key takeaways
- The 2025 Cost vs. Value report put a universal-design bath remodel in Minneapolis at $43,965, which is $16,552 more than its $27,413 midrange bath remodel. It estimates 61% of that cost is recouped at resale, as reported by HomeBuildersMN.com.
- The ADA’s design standards cover places open to the public, not the part of a home used only as a residence. They are still useful yardsticks for a home bathroom, such as a 32-inch clear door opening and grab bars built to take 250 pounds of force.
- Minnesota Housing’s Fix Up Accessibility Loan goes up to $35,000, and its income waiver applies to accessibility improvements for a family member with a disability (confirm eligibility with a participating lender). Grab bars, wider doorways and bathroom fixture modifications are eligible, according to the program sheet dated May 1, 2025.
- Grab bars need solid backing. Plan the blocking while the walls are open, especially in Minneapolis and St. Paul, where more than half of owner-occupied homes were built in 1939 or earlier.
An aging in place bathroom remodel rebuilds a bath around universal-design features such as a curbless shower, grab bars and a wider door. The 2025 Cost vs. Value report priced its universal-design bath remodel at $43,965 in Minneapolis, as reported by HomeBuildersMN.com. The same report priced a standard midrange bath remodel at $27,413, so the universal-design version cost $16,552 more.
No single accessibility spec applies to a house. You decide which features fit the people who will use the room. Below: what each feature involves in an older Twin Cities home, how to pay for it and who builds it.
What an accessible bathroom remodel costs in the Twin Cities
| Project | Scope | Published price or value | Source |
|---|---|---|---|
| Shower or tub replacementScope: Wet area only | Wet area only | From $12,000 to about $20,000Source: Precision Tiling (Oakdale) | Precision Tiling (Oakdale) |
| Midrange bath remodelScope: Standard project, Minneapolis | Standard project, Minneapolis | $27,413 (79.7% recouped)Source: Cost vs. Value 2025, as reported | Cost vs. Value 2025, as reported |
| Bathtub conversion to showerScope: Nothing changes outside the tub area | Nothing changes outside the tub area | $30,171–$34,697Source: Castle | Castle |
| Universal-design bath remodelScope: Standard project, Minneapolis | Standard project, Minneapolis | $43,965 (61% recouped)Source: Cost vs. Value 2025, as reported | Cost vs. Value 2025, as reported |
| Classic gut-to-studs remodelScope: 40 sq ft | 40 sq ft | $45,708–$52,678Source: Castle | Castle |
Source: Remodeling/JLC Cost vs. Value 2025, Minneapolis, as reported by HomeBuildersMN.com; Castle Building & Remodeling 2026 Twin Cities Remodeling Cost Guide, p. 16; Precision Tiling (accessed October 2026).
The rows differ in scope. Castle’s tub-to-shower price changes nothing outside the tub area, and its hall-bath budgets assume fixtures, walls and doors stay put. A fully accessible bath can break those assumptions: the door gets wider, the floor is lowered for a curbless shower, or a wall moves to make turning room. Each change adds framing, finish and permit work. For the wider range of Twin Cities prices, see our bathroom remodel costs and calculator.
Local note: Our permit data doesn’t break out accessible bathrooms, so we don’t publish a permit figure for them.
ADA bathroom remodel vs. universal design: which rules apply to a house?
For a bathroom used only by your household, the ADA dimensions below are planning references. If your home also contains a business covered by ADA Title III, coverage extends to the parts used for that business, including shared areas and the route its clients use. A restroom available to clients can be covered even when your family also uses it. The part used exclusively as a residence is outside Title III. Separate housing requirements and local building rules can apply to the project.
The ADA’s 2010 Standards are still a precise, public yardstick for a home bathroom. Even those standards relax two rules for residential dwelling units. Toilet seats may be 15 to 19 inches high instead of 17 to 19. Grab bars can be left off if the walls have reinforcement where bars could go later.
In covered multifamily housing, including condos and apartments, the Fair Housing Act’s design and construction rules may already have helped. Buildings with four or more units built for first occupancy after March 13, 1991 generally had to include bathroom-wall reinforcement for future grab bars in all units in buildings with one or more elevators, and in ground-floor units in buildings without elevators. For a detached single-family house, check what backing is actually in the wall.
Universal design bathroom features and what they involve
| Feature | ADA reference point (public buildings) | What it involves at home |
|---|---|---|
| Curbless (roll-in) shower | Standard roll-in shower at least 30 × 60 in. with a 60-inch minimum entry. The alternate roll-in layout is 36 inches wide and at least 60 inches deep, with a 36-inch minimum entry at one end of the long side. The roll-in threshold is ½ inch maximum. | Ask which layout fits the room and leaves a usable approach. Recessing the floor, moving the drain and waterproofing may be needed. |
| Grab bars | Horizontal bars 33–36 inches high; bar, fasteners and wall built to take 250 pounds of force | Solid blocking or reinforcement behind the wall |
| Comfort-height toilet | Seat 17–19 inches to the top of the seat (15–19 allowed in residential units) | A fixture swap if the drain stays put |
| Wider door | 32 inches clear minimum, measured from the open door’s face to the stop | New framing and trim; building-permit work |
| Lever handles | Usable with one hand, no tight grasping, pinching or twisting of the wrist; 5 pounds of force or less | Lever faucets, door levers |
| Handheld shower | Hose at least 59 inches, works fixed or handheld; water 120°F maximum | Slide bar placed so it doesn’t block grab bars |
| Clear floor space | General clear floor space starts at 30 × 48 in. Toilet clearance is at least 60 in. wide by 56 in. deep under §604.3.1. Turning space can be a 60-inch circle or a T-shaped space meeting §304.3.2. | Mark the fixture clearances and turning space on the floor plan before choosing a layout. |
| Slip-resistant floor | Floors “stable, firm, and slip resistant” | Tile rated for wet interior floors |
| Switches and controls | For an unobstructed reach, 15–48 inches above the floor; obstructions can reduce the maximum height. | Moving outlets and switches |
Source: 2010 ADA Standards for Accessible Design, sections 302–309, 404, 604, 608 and 609 (checked Nov. 21, 2026).
For floors, ask for tile rated “Interior, Wet” under ANSI A326.3, the tile industry’s slip-resistance standard. The Tile Council of North America says that category means a wet dynamic coefficient of friction of at least 0.42, or a rating declared by the manufacturer.
Curbless shower: what it takes in an older house
A curbless shower has no curb, so the floor’s slope keeps the water in. Schluter’s installation instructions say curbless tiled showers “rely on the floor slope” to contain water. On a wood-framed floor, systems such as Schluter’s KERDI-SHOWER-FRS recess the subfloor in the shower area so the shower floor can slope to the drain while the rest of the bathroom stays level. That system requires joists no more than 19.2 inches apart on center and enough depth left below the recess for the plumbing. The instructions also cite industry guidelines to waterproof at least 1 foot beyond the shower area, and say managing drain clogs is especially important in curbless showers.
Permits come with the work. Minneapolis requires a plumbing permit to replace or install a shower or tub. Moving walls or lowering a floor is framing work, and framing isn’t on the city’s list of permit-exempt work. In Blaine, tiled showers get a shower-pan inspection. Our permit guide compares Minneapolis, St. Paul and 13 suburbs. If a curbless tiled floor is more than you need, a low-threshold shower base is another route; see our walk-in shower cost guide and tub-to-shower conversion costs.
Grab bar installation: plan the blocking before the walls close
A grab bar is only as strong as what it’s fastened to. The ADA standard for public buildings requires the bar, its fasteners and the supporting structure to handle a 250-pound force at any point. At home, plan wood blocking or plywood backing while the wall is open. Wide backing lets you place bars where they work best, now or later.
Older Twin Cities bathrooms make this harder. About three in four owner-occupied homes in Minneapolis (77%) and St. Paul (76%) were built before 1960 (Census ACS 2020–2024). Castle’s 2026 guide budgets up to $3,000 just to demolish a mud-set tile floor and wainscot in an older hall bath. If plaster or tile walls stay closed, the installer has to hit studs or use anchors rated for that wall. Ask what each bar will be anchored to and what load it is rated for.
Watch out: Paid work that disturbs painted surfaces in pre-1978 housing generally requires an EPA-certified renovation firm. Opening painted plaster to add blocking or widen a door can fall under the rule. Exceptions include components determined to be lead-free and certain minor repairs. Check the firm in the EPA certified-firm search before demolition starts. Our old-house bathroom remodel guide explains the exceptions and when they apply.
Wider doors and clear floor space
A wider door is framing and trim work, and framing isn’t on Minneapolis’s list of permit-exempt work, so expect a building permit there. Clear width is measured from the face of the open door to the stop, so a 32-inch clear opening takes a door wider than 32 inches.
In a 5 × 8 ft hall bath, a 60-inch turning circle spans the full width. Ask the designer to draw both the turning space and the clearance at each fixture. A T-shaped turn is another option under the standards. Moving a wall to make room goes beyond what Castle’s hall-bath budgets assume.
Paying for it: the Minnesota Housing Fix Up Accessibility Loan and other options
Fix Up Accessibility Loan. Minnesota Housing’s Fix Up program offers a secured Accessibility Loan of up to $35,000 with an income waiver for accessibility improvements for a family member with a disability (confirm eligibility with a participating lender). Eligible items include widening doorways, moving outlets and switches, modifying hardware, grab bars and bathroom fixture modifications. The minimum loan is $2,000. Terms run up to 10 years for loans up to $10,000 and up to 20 years above that. The minimum credit score is 620, and rates are posted by Minnesota Housing. You must own the home, live in it for the loan term and apply through a participating lender. For a bigger project, the program sheet points to the regular Fix Up Loan, which goes up to $75,000 secured but has income limits.
Rehabilitation and Emergency & Accessibility loans. For low-income homeowners, Minnesota Housing also lists these two programs, made through participating lenders. They have income limits, an asset cap of $25,000 and a maximum loan of $37,500. The loans are forgiven if you don’t sell, transfer title or move out during the loan term.
Local lenders. The Center for Energy and Environment (612-335-5884) is a metro Fix Up lender and runs city-specific loan programs.
We don’t give financial advice. For program contacts, call Minnesota Housing at 800-657-3769 or see the state agency directory. Compare options in our bathroom remodel financing guide.
Who does accessible bathroom remodels
Start with the license. In Minnesota, a contractor you hire for two or more of the state’s eight “special skills,” such as carpentry, drywall and plaster, and interior finishing, generally needs a residential remodeler license. Check it in the DLI license lookup.
Then look for accessibility experience. The National Association of Home Builders awards the Certified Aging-in-Place Specialist (CAPS) credential. Holders complete three courses (on communicating with aging-in-place clients, design concepts, and details and solutions), sign a code of ethics and complete four hours of continuing education a year. Remodelers must also show proof of liability and workers’ compensation insurance where required, or work for a company that carries both. NAHB’s CAPS page links to a directory of credential holders. CAPS is a training credential, not a state license, so check both.
Questions to ask any remodeler:
- Where will the blocking go, and how wide will it be?
- How will the curbless floor be recessed, and how far will the waterproofing extend?
- What will the clear door width be, measured to the stop?
- Which permits will you pull, and who schedules the inspections?
Our guide to hiring a bathroom remodeler covers license checks, contracts and lien notices. If you’re weighing a walk-in tub instead, see walk-in tub costs.
Next steps
- List the features you want. Use the table above. You decide what the room needs. Blocking is easiest to add while the walls are already open, so include it in any remodel you’re planning.
- Measure. Note the door’s clear width, the room’s width and length, and the tub or shower size.
- Check funding before you sign. If the Fix Up Accessibility Loan fits, talk to a participating lender early.
- Get itemized quotes for the same scope. Ask each remodeler to list blocking, floor recessing, waterproofing, door work and permits separately. Our quote checklist helps you compare.
Keep planning
Describe your bathroom project and build a scope checklist to take to a contractor.
Frequently asked questions
Does the ADA apply to a bathroom remodel in my house?
A bathroom used only by the household generally falls outside ADA Title III. If clients of a covered home business use the bathroom or a route through the house, those shared spaces are covered. The ADA dimensions can help you plan a private bathroom. Separate housing and local building requirements can also apply.
How much does a curbless or roll-in shower cost in Minneapolis?
We haven’t found a Twin Cities firm that publishes a price for a curbless or roll-in shower specifically. The nearest published reference is Castle Building & Remodeling’s 2026 guide, which prices a standard tub-to-shower conversion that changes nothing outside the tub area at $30,171–$34,697. A curbless shower can add framing work to recess the floor, so get it priced as its own line in a written quote.
Can a Minnesota loan fund an accessible bathroom?
Yes. Minnesota Housing’s Fix Up Accessibility Loan is secured and goes up to $35,000, with an income waiver for accessibility improvements for a family member with a disability. Grab bars, widening doorways and bathroom fixture modifications are eligible, and you apply through a participating lender, who confirms whether you qualify. Lower-income homeowners can also ask about the Rehabilitation Loan and Emergency & Accessibility Loan programs.
What is a CAPS remodeler?
CAPS stands for Certified Aging-in-Place Specialist, a credential from the National Association of Home Builders. Holders complete three courses, sign a code of ethics, and do four hours of continuing education a year. Remodelers must also show proof of liability and workers’ compensation insurance where required, or work for a company that carries both. It is a training credential, not a Minnesota license.
How high should grab bars be?
The ADA standard for public buildings puts horizontal grab bars 33 to 36 inches above the floor, measured to the top of the bar. At home, set them where the people using the bathroom want them. Wide blocking behind the wall lets you add or move bars later.
Does an accessible bathroom add resale value?
One survey-based estimate says it adds resale value but recoups a smaller share of its cost. The 2025 Cost vs. Value report for Minneapolis, as reported by HomeBuildersMN.com, estimated a $43,965 universal-design bath remodel adds $26,800 at resale (61% of cost), compared with $21,839 (79.7%) for a $27,413 midrange bath remodel. The rest of the value is in how the room works for the people who use it.
Sources
- Cost to Remodel a House in Minnesota (reporting the 2025 Cost vs. Value Report, Minneapolis) (opens in a new tab) — HomeBuildersMN.com.
- 2026 Twin Cities Remodeling Cost Guide (pp. 14, 16) (opens in a new tab) — Castle Building & Remodeling.
- Bathroom Remodel Cost St. Paul MN: 2026 Price Bands (opens in a new tab) — Precision Tiling.
- 2010 ADA Standards for Accessible Design (sections 302.1, 304.3, 305.3, 308, 309.4, 404.2.3, 604.3–604.5, 608.2, 608.6–608.7, 609.4 and 609.8) (opens in a new tab) — U.S. Department of Justice (ADA.gov).
- 28 CFR § 36.207, Places of public accommodation located in private residences (opens in a new tab) — U.S. Department of Justice.
- Introduction to the Americans with Disabilities Act (opens in a new tab) — U.S. Department of Justice (ADA.gov).
- Joint Statement of HUD and DOJ: Accessibility (Design and Construction) Requirements for Covered Multifamily Dwellings under the Fair Housing Act (opens in a new tab) — U.S. Department of Justice and U.S. Department of Housing and Urban Development.
- Installation instructions for Schluter-KERDI-SHOWER-FRS (opens in a new tab) — Schluter Systems.
- Dynamic Coefficient of Friction: Frequently Asked Questions (ANSI A326.3) (opens in a new tab) — Tile Council of North America.
- Certified Aging-in-Place Specialist (CAPS) (opens in a new tab) — National Association of Home Builders.
- How to Earn Your CAPS (opens in a new tab) — National Association of Home Builders.
- Fix Up Loan Program Features and Program Summary (dated 05/01/2025) (opens in a new tab) — Minnesota Housing.
- Improve Your Home (Fix Up, Rehabilitation and Emergency & Accessibility loans) (opens in a new tab) — Minnesota Housing.
- Loans (opens in a new tab) — Center for Energy and Environment.
- Plumbing permits (opens in a new tab) — City of Minneapolis.
- Work exempt from permit (opens in a new tab) — City of Minneapolis.
- Bathroom Project (opens in a new tab) — City of Blaine.
- ACS 2020–2024 5-year, table B25036 (tenure by year structure built), Minneapolis and St. Paul (opens in a new tab) — Census Reporter (U.S. Census Bureau data).
- Minnesota Statutes 326B.805, Licensing (residential remodelers) (opens in a new tab) — Minnesota Office of the Revisor of Statutes.
- License and registration lookup (opens in a new tab) — Minnesota Department of Labor and Industry.
- Lead Renovation, Repair and Painting Program Rules (opens in a new tab) — U.S. Environmental Protection Agency.
- Locate Certified Renovation and Lead Dust Sampling Technician Firms (opens in a new tab) — U.S. Environmental Protection Agency.
- Minnesota Rules 1300.0160, Fees (opens in a new tab) — Minnesota Office of the Revisor of Statutes.
- Income Limits for Home Improvement Programs (opens in a new tab) — Minnesota Housing.
Our guides are written independently, and we don’t rank remodelers. How we research.