Costs · Tub & shower

Tub-to-shower conversion cost in the Twin Cities

Key takeaways

  • Twin Cities firms that publish prices describe different conversion scopes: from about $12,000 with a new vanity (Premium Bathrooms), $18,000–$28,000 with tile and frameless glass (Precision Tiling) and $30,171–$34,697 for the tub area only (Castle Building & Remodeling’s 2026 guide).
  • Our calculator’s 2026 planning range for a midrange tub-to-tiled-shower conversion is $9,000–$16,500 before upgrades and reserve, with the rest of the room unchanged.
  • Installers say panel showers with acrylic or solid-surface walls go in within one to about five days, but the local installers we checked don’t publish prices, so there is no local figure to compare. HomeAdvisor’s national range for a conversion is $1,500–$8,000.
  • Minneapolis building permits for tub- and shower-only jobs had a median declared permit value of $7,322 from 2023 through October 9, 2026. That is a valuation for permit fees, not a contract price, and a swap that pulls only a plumbing permit isn’t counted.
  • Minnesota’s permit rule requires plumbing permits unless the work is specifically exempt. Minneapolis names showers and tubs, and Blaine also inspects the shower pan on tiled showers.

Next step

Describe your bathroom project and build a scope checklist to take to a contractor.

Twin Cities firms that publish prices for a tub to shower conversion, with the tub torn out and a new shower built, each describe a different scope. Premium Bathrooms says an essential refresh with a tub-to-shower conversion and a new vanity starts around $12,000. Precision Tiling, an Oakdale firm serving St. Paul and the east metro, says its conversions typically run $18,000–$28,000, with tile and frameless glass included (page updated August 2026). Castle Building & Remodeling’s 2026 Twin Cities cost guide lists $30,171–$34,697.

The local panel-system installers we checked don’t publish prices, so there is no local figure for that method. HomeAdvisor’s national guide (updated June 2026) puts most conversions at $1,500–$8,000. Permit records don’t fill the gap: a declared permit value is a valuation for fees, not a contract price, and the records don’t separate panel systems from tiled work.

Tub to shower conversion cost by method

There are three common ways to turn a tub alcove into a shower.

Method Published price Time on site
Panel shower: acrylic or solid-surface walls on a pre-formed base Not published by local installers we checked. National range for all conversions: $1,500–$8,000 (HomeAdvisor) 1 day (Bath Fitter advertises) to 3–5 days (TWS Remodeling)
Shower built in the tub footprint by a tile or remodeling firm From about $12,000 with a new vanity, material not stated (Premium Bathrooms); $18,000–$28,000 with tile and frameless glass (Precision Tiling) Often under 3 weeks, plus glass
Conversion by a design-build firm (shower material not stated) $30,171–$34,697 (Castle, pre-1960 home) Not stated for this project

Source: Premium Bathrooms; Precision Tiling (updated August 2026); Castle Building & Remodeling 2026 cost guide, p. 16; HomeAdvisor (updated June 17, 2026); Bath Fitter; TWS Remodeling (accessed October 2026).

The spread is wide, and “tub to shower conversion” covers very different jobs. HomeAdvisor’s national figures cover simpler jobs: it prices a prefab shower stall at $1,000–$8,000 installed and a custom tiled walk-in conversion at $3,500–$15,000. Precision Tiling’s $18,000–$28,000 conversion price includes a Schluter or Wedi waterproofing system, tile, fixtures and frameless glass.

Our calculator’s 2026 planning range for a midrange tub-to-tiled-shower conversion is $9,000–$16,500 before upgrades and reserve. Moving a drain within the tub area is part of the conversion scope. Ask which glass and drain work the installer includes.

Read Castle’s number closely. Its scope covers only the tub area, with no change to the floor, walls, vanity, sink, toilet or electrical, and the owner paints. Castle is a design-build firm, and its guide assumes a pre-1960 home with average finishes. So the price covers rebuilding one alcove, not a new bathroom.

Keeping the tub-and-shower layout and rebuilding only the wet area is a replacement, not a conversion. Precision Tiling prices those like-for-like rebuilds at $12,000 to about $20,000, depending on tile and glass.

What each type of conversion includes

A conversion always means the tub comes out. What replaces it is where the two options below differ.

What differs Panel shower Custom tile shower
Walls Large panels: acrylic or solid surface (cultured marble, quartz and similar) Tile set over a waterproofing membrane or board
Floor Pre-formed base sized to the old tub opening Sloped tiled floor over a waterproof pan, or a pre-formed base
Joints A few sealed seams, no grout lines Grout joints across walls and floor
Niche and bench Limited to the maker’s options Built to fit, at extra tile labor
Glass Stock door or curtain Often custom frameless glass
Time on site 1 to about 5 days 1 to 3 weeks, plus glass lead time

Source: Castle Building & Remodeling FAQ, p. 21; Precision Tiling; Premium Bathrooms; TWS Remodeling; Bath Fitter (accessed October 2026).

Castle’s FAQ suggests a solid-surface surround for owners who don’t want grout or want to save money. Premium Bathrooms ranks a custom tile shower with niches and a bench above FlexStone panels, which cost more than a standard tub surround.

Watch out: Premium Bathrooms notes that national “bath in a day” companies advertise much lower prices, usually for acrylic liners installed over an existing tub or shower. A liner over a tub keeps the tub. If you want a shower, get it in writing that the tub is removed and what the new base sits on.

Tub to shower conversion cost in Minneapolis: what permit records show

We analyzed City of Minneapolis building permits for 1–3 family homes and found 178 from 2023 through October 9, 2026 whose descriptions point only to tub or shower work, such as a replacement, a new surround or a walk-in shower. Their median declared permit value, the value used to set permit fees, not a contract price, was $7,322, and the middle half ran from $4,926 to $12,845.

In St. Paul, the same kind of job had a median declared permit value (the value used to set permit fees, not a contract price) of $9,000, with the middle half at $6,422–$12,647. Those figures cover 2023 through June 30, 2025, where St. Paul’s open permit data ends.

Don’t read these as prices, for three reasons:

  1. The building official sets the declared value under Minnesota Rules 1300.0160, which says it should include all construction work. It is still not a contract price, and these records contain no contract prices to compare it with.
  2. A swap that pulls only a plumbing permit, or no permit, isn’t in this data.
  3. We sorted permits with keyword rules, and Minneapolis cuts descriptions off at 255 characters.

See the full tables on our bathroom permit data page and our methodology.

What drives the cost of a bathtub to shower conversion

When bids for a conversion differ, the gap usually comes down to a few items.

Getting the old tub out

More than half of owner-occupied homes in Minneapolis (57%) and St. Paul (53%) were built in 1939 or earlier (Census Bureau, 2020–2024 American Community Survey). In a house that age, the tub coming out may be original cast iron, which is heavy and awkward on narrow stairs. Ask how tear-out and haul-away are priced. Castle’s hall-bath budget adds $0–$2,000 for difficult access, such as a condo or third floor.

What’s behind the walls

Older Twin Cities bathrooms may have plaster walls or tile set in a thick mortar bed. Castle’s hall-bath budget adds $0–$3,000 to demolish mud-set floor and wainscot tile. TWS Remodeling says that once the tub is out of an older metro home, it regularly finds galvanized supply lines or a subfloor gone soft from years of a leaking tub. Ask how hidden conditions are priced. Our old-house remodel guide covers the common surprises.

Where the drain goes

Precision Tiling notes that leaving the drain where it sits avoids moving plumbing, which it calls the most expensive change in any bathroom, and lists moving a drain among the changes that add cost. Moving it means opening the floor, and sometimes the ceiling below.

Waterproofing

In a tiled shower, the waterproofing matters more than the tile you see. Precision Tiling says a certified Schluter or Wedi system adds a few hundred dollars in material and a day of labor. Ask which system is used.

The shower valve

When the wall behind the valve is open, it’s the natural time to replace an old two-handle valve. A Department of Labor and Industry illustration of Minnesota’s plumbing code (Minn. R. ch. 4714) shows shower and tub/shower water capped at 120°F by a point-of-use control valve meeting ASSE 1016 (or ASME A112.18.1), with scald and thermal-shock protection. ASSE International says three valve types meet that standard: pressure-balancing, thermostatic and a combination of the two.

Glass, curb and extras

  • Glass: Castle’s hall-bath budget adds $0–$5,000 for a shower door or enclosure. Premium Bathrooms says custom frameless glass is measured after the tile is set and typically goes in 2 to 4 weeks later.
  • Curb or curbless: The local firms we checked price curbless above a standard curb. Precision Tiling places curbless work in its primary-bath ($35,000–$60,000) and spa tiers, above its conversion range, and Premium Bathrooms puts curbless and steam showers at the top of its shower options. See our accessible bathroom guide for curbless planning.
  • Niche and bench: Each adds cutting and waterproofing details to a tiled shower, and tile is labor-heavy. Castle says an average bathroom floor and shower take over 100 hours of labor to tile.
  • Ventilation: A new shower is a good time to check the exhaust fan. See our exhaust fan guide.

Local note: If your home was built before 1978 and the job disturbs painted surfaces, the company you pay generally needs EPA certification. See EPA coverage and exceptions before removing the tub surround. About three in four owner-occupied homes in Minneapolis (77%) and St. Paul (76%) were built before 1960, well before that cutoff.

Should you keep at least one tub?

Castle’s FAQ says a bathtub isn’t required by code, but real estate agents strongly recommend having one. Whether that matters depends on your house and plans:

  • Is this the only tub in the house? If another bathroom keeps one, converting this one is an easier call.
  • How long will you stay? A shower you use daily for ten years may be worth more to you than a tub a future buyer might want.
  • If this is your only bathroom, plan where you’ll shower during the work. Castle notes there are ways to keep a toilet working through a project, but not the shower.

Do you need a permit for a tub to shower conversion?

Usually, yes. Minnesota Rules 1300.0120 exempts tiling and similar finish work from a building permit, but says plumbing, electrical and mechanical permits are required unless otherwise exempted. City rules add detail:

  • Minneapolis requires a plumbing permit to “replace or install fixtures, like sinks, showers and tubs.”
  • St. Paul requires a plumbing permit to install, alter, replace or relocate piping. Licensed plumbing contractors or homesteading homeowners can pull it.
  • Burnsville requires a plumbing permit when replacing a fixture “breaks the seal” on the drain, and its list of fixtures includes showers and bathtubs.
  • Bloomington charges plumbing permits at 2% of job valuation plus the state surcharge, with a $65 residential minimum.
  • Blaine inspects the shower pan on tiled showers.

Rebuilt framing or new wiring can add a building or electrical permit. Minnesota law lets owners do plumbing on a home they own and live in unless a local ordinance forbids it (Minn. Stat. 326B.46). Our permit guide has city-by-city details.

How long does a tub to shower conversion take?

  • Panel systems: Bath Fitter’s site advertises one-day installations. TWS Remodeling, a New Hope company that installs a solid-surface shower line, says most tub-to-shower conversions in Twin Cities homes take three to five days. It says what stretches the schedule is what turns up once the tub comes out.
  • Tiled showers: Precision Tiling says its conversions often finish faster than its three-week standard. Premium Bathrooms says most projects take 1 to 3 weeks on site, with custom glass 2 to 4 weeks after tile.

Allow time for permits and inspections. For comparison, Castle puts a complete gut remodel at about 10–13 weeks. See our remodel timeline guide.

How to compare tub to shower conversion companies near you

Searching “tub to shower conversion companies near me” turns up three kinds of business:

  1. Bath-system companies, including franchises and brand dealers, that install acrylic or solid-surface panels.
  2. Tile and shower specialists that build tiled showers.
  3. Remodelers and design-build firms that handle a conversion as part of a broader shower remodel in Minneapolis or St. Paul.

Pick your method first so quotes compare like with like. Our one-day bath vs. full remodel guide and walk-in shower cost guide can help.

Check licensing either way. Minnesota requires a residential remodeler license for a company that contracts with a homeowner for two or more special skills, such as carpentry and interior finishing. Plumbing needs a licensed plumber unless you do it yourself in a home you own and live in and local rules allow it. Look up any company on the DLI license lookup.

Questions to ask before you sign

  1. Is the tub being removed, or is a liner going over it?
  2. Which waterproofing system goes behind the walls and under the floor?
  3. Does the drain stay put? If it moves, what’s included for the floor and ceiling below?
  4. Is the valve replaced, and is it pressure-balancing, thermostatic or a combination?
  5. Who pulls the plumbing permit, and are fees and inspections in the price?
  6. How are rot, old piping or damaged plaster priced if found?
  7. Is glass included, and what is its lead time?
  8. For a pre-1978 house, is the company EPA lead-safe certified?

Our quote checklist has a fuller list, and the quote comparison worksheet lines bids up side by side.

Next steps

Ask each bidder to price the same shower footprint, wall finish and door. Use the quote checklist to compare what each price includes.

Keep planning

Describe your bathroom project and build a scope checklist to take to a contractor.

Frequently asked questions

How much does a tub to shower conversion cost in Minneapolis?

It depends on the scope each firm prices: Premium Bathrooms starts around $12,000 with a new vanity, Precision Tiling lists $18,000–$28,000 with tile and frameless glass, and Castle’s 2026 guide lists $30,171–$34,697 for the tub area of a pre-1960 home. The local panel-system installers we checked don’t publish prices.

Do I need a permit to convert a bathtub to a shower in Minnesota?

Usually, yes. Minnesota’s rule requires plumbing permits unless the work is exempt, and Minneapolis requires one to replace or install showers and tubs. Tile alone doesn’t need a building permit, but framing or electrical work can add other permits.

How long does a tub to shower conversion take?

Panel systems take one day to about five days on site, based on what Bath Fitter and TWS Remodeling publish. Local tile and remodeling firms say about 1 to 3 weeks for tiled work. Custom frameless glass is often installed 2 to 4 weeks after the tile is set.

Will converting my only bathtub to a shower hurt resale?

Castle Building & Remodeling’s cost guide says a bathtub isn’t required by code, but real estate agents strongly recommend having one. If it’s the only tub in the house, weigh how long you plan to stay and whether a tub could stay in another bathroom.

Is an acrylic or solid-surface shower cheaper than tile?

The firms’ own rankings point that way, though local panel installers don’t publish prices. Premium Bathrooms ranks a custom tile shower above FlexStone panels, which cost more than a standard tub surround. Tile is labor-heavy: Castle says an average bathroom floor and shower take over 100 hours to tile.

Sources

  1. 2026 Twin Cities Remodeling Cost Guide (pp. 14, 16, 21) (opens in a new tab) — Castle Building & Remodeling. Accessed . Design-build firm; prices assume pre-1960 homes and average finishes. Bathtub conversion to shower on p. 16; hall-bath line items on p. 14; FAQ on p. 21.
  2. Bathroom Remodel Cost St. Paul MN: 2026 Price Bands (opens in a new tab) — Precision Tiling. Accessed . Oakdale firm serving St. Paul and the east metro; page updated August 2026. Tub-to-shower conversions $18,000–$28,000; like-for-like shower or tub rebuild $12,000 to about $20,000; waterproofing and curbless notes.
  3. Tub-to-Shower Conversion (opens in a new tab) — Precision Tiling. Accessed . $18,000 to $28,000 complete, with a Schluter or Wedi waterproofing system, tile, fixtures and frameless glass.
  4. Bathroom Remodel Cost in Minneapolis: 2026 Twin Cities Cost Guide (opens in a new tab) — Premium Bathrooms. Accessed . Essential refresh with tub-to-shower conversion from about $12,000; 1–3 weeks on site; glass timing.
  5. How Much Does a Tub to Shower Conversion Cost? (updated June 17, 2026) (opens in a new tab) — HomeAdvisor. Accessed . National figures, not Twin Cities: most conversions $1,500–$8,000; prefab shower stall $1,000–$8,000; custom tiled walk-in conversion $3,500–$15,000.
  6. One-Day Bath & Shower Remodeling (opens in a new tab) — Bath Fitter. Accessed .
  7. Tub-to-Shower Conversion (Sept. 3, 2026) (opens in a new tab) — TWS Remodeling. Accessed .
  8. CCS_Permits (building permits), data through October 9, 2026 (opens in a new tab) — City of Minneapolis. Accessed . PermitPriced analysis: 1–3 family permits describing tub or shower work only, 2023 to October 9, 2026; declared valuations, not contract prices.
  9. Approved Building Permits (data ends June 30, 2025) (opens in a new tab) — City of Saint Paul. Accessed . PermitPriced analysis: single-family, duplex and townhouse permits describing tub or shower work only, 2023 to June 30, 2025.
  10. Minnesota Rules 1300.0160, Fees (opens in a new tab) — Minnesota Office of the Revisor of Statutes. Accessed . Building permit valuation is set by the building official.
  11. Minnesota Rules 1300.0120, Permits (opens in a new tab) — Minnesota Office of the Revisor of Statutes. Accessed .
  12. Plumbing permits (opens in a new tab) — City of Minneapolis. Accessed .
  13. Plumbing & Gas (opens in a new tab) — City of Saint Paul. Accessed .
  14. Plumbing Permit (opens in a new tab) — City of Burnsville. Accessed .
  15. Bathroom Project (opens in a new tab) — City of Blaine. Accessed .
  16. Permit information and fees (opens in a new tab) — City of Bloomington. Accessed .
  17. Minnesota Statutes 326B.46, Plumbing licensing (opens in a new tab) — Minnesota Office of the Revisor of Statutes. Accessed . The owner exemption for plumbing.
  18. Water temperature control valves/devices (Minn. R. ch. 4714) (opens in a new tab) — Minnesota Department of Labor and Industry. Accessed .
  19. Guidelines for Temperature Control Devices in Domestic Hot Water Systems (opens in a new tab) — ASSE International. Accessed . Lists the three shower valve types that meet ASSE 1016.
  20. ACS 2020–2024 5-year, table B25036 (tenure by year structure built), Minneapolis and St. Paul (opens in a new tab) — Census Reporter (U.S. Census Bureau data). Accessed .
  21. Lead Renovation, Repair and Painting Program Rules (opens in a new tab) — U.S. Environmental Protection Agency. Accessed .
  22. License and registration lookup (opens in a new tab) — Minnesota Department of Labor and Industry. Accessed .
  23. Minnesota Statutes 326B.802, Definitions (residential remodeler, special skills) (opens in a new tab) — Minnesota Office of the Revisor of Statutes. Accessed .

Our guides are written independently, and we don’t rank remodelers. How we research.

Free tool

Bathroom remodel cost calculator

Get a range for a full remodel or a shower or tub replacement with tiled walls. Other projects, such as replacing an acrylic or panel system on its own, get a checklist.