Costs · Tub & shower

What a walk-in shower costs in the Twin Cities

Key takeaways

  • Precision Tiling, an Oakdale firm that serves St. Paul and the east metro, lists $12,000 to about $20,000 for a tiled shower replacement and $18,000–$28,000 for a standalone custom shower or a tub-to-shower conversion (updated August 2026).
  • Castle Building & Remodeling’s 2026 guide prices a tub-to-shower conversion that stays inside the old tub area at $30,171–$34,697, assuming a pre-1960 home and average finishes.
  • Our calculator’s 2026 planning range for a midrange tiled shower replacement is $9,000–$16,500 before upgrades and reserve. The same wet-area work has the same subtotal in every room size.
  • Minneapolis permits for tub-and-shower-only jobs had a median declared permit value of $7,322 (178 permits, 2023 to October 9, 2026). That is a valuation for permit fees, not a contract price to budget from.
  • A curbless (zero-entry) shower usually needs the shower floor recessed or the rest of the room built up. Precision Tiling places curbless work inside its $35,000–$60,000 and $60,000–$90,000+ tiers.

Next step

Describe your bathroom project and build a scope checklist to take to a contractor.

Precision Tiling, an Oakdale firm that serves St. Paul and the east metro, publishes $12,000 to about $20,000 to rebuild a tiled walk-in shower in the same footprint, and $18,000–$28,000 for a standalone custom build or a tub-to-shower conversion (updated August 2026). A design-build firm’s figure is higher: Castle Building & Remodeling’s 2026 guide puts a tub-to-shower conversion that stays inside the old tub area at $30,171–$34,697. National figures run much lower (HomeAdvisor lists $1,500–$8,000 for a walk-in shower). The figures differ in scope: panels or tile, what is hiding behind the old walls, and whether the floor has to change.

Walk-in shower cost at a glance

Each row is one source’s number for one kind of job. We don’t average them, because they describe different work.

Scope Figure Source
Walk-in shower, national, any build $1,500–$8,000; most about $5,400Source: HomeAdvisor (updated June 2026) HomeAdvisor (updated June 2026)
Shower rebuild, same footprint $12,000 to about $20,000, “depending on tile and glass”Source: Precision Tiling Precision Tiling
Custom tiled shower, standalone $18,000–$28,000Source: Precision Tiling Precision Tiling
Tub-to-shower conversion, no change outside the tub area $30,171–$34,697Source: Castle 2026 guide, p. 16 Castle 2026 guide, p. 16
Primary bath with custom walk-in shower, heated floors, frameless glass $35,000–$60,000Source: Precision Tiling Precision Tiling
Universal-design bath remodel (whole room), Minneapolis $43,965Source: Cost vs. Value 2025, as reported by HomeBuildersMN.com Cost vs. Value 2025, as reported by HomeBuildersMN.com
Spa build with steam and curbless entry $60,000–$90,000+Source: Precision Tiling Precision Tiling

Source: Precision Tiling, Castle Building & Remodeling, HomeAdvisor, Remodeling/JLC Cost vs. Value 2025 as reported by HomeBuildersMN.com (accessed October 2026).

Our calculator’s 2026 planning range for a midrange tiled shower is $9,000–$16,500 before upgrades and reserve. This covers the wet area. Ask the installer to itemize the enclosure, waterproofing and any hidden repairs.

Local note: City permit records measure something different. Tub-and-shower-only building permits had a median declared value of $7,322 in Minneapolis (2023–2026, 178 permits, middle half $4,926–$12,845) and $9,000 in St. Paul (2023 to June 30, 2025, where its open data ends; 138 permits, middle half $6,422–$12,647). These are valuations set by the building official for permit fees (Minn. R. 1300.0160), not contract prices, and a swap that pulls only a plumbing permit, or none, isn’t counted. Our permit data report explains the method.

Prefab vs. tiled walk-in shower remodel: where the money goes

A prefab walk-in shower is a molded base plus wall panels, usually acrylic, fiberglass or a solid-surface material. Labor is lower and there are few seams. The trade-off is fixed sizes and finishes, so the shower usually keeps the footprint of the old tub alcove. One-day bath companies use panel systems; see one-day bath vs. a full remodel for what those jobs include.

A tiled walk-in shower is built on site: a sloped floor, a waterproofing layer, then tile. It can be any size and can include a niche, a bench, a linear drain or a curbless entry. It is also labor-heavy. Castle’s FAQ says tile is expensive mainly because of labor: an average bathroom floor and shower take “over 100 hours.”

Older Twin Cities houses add their own line items. Castle’s prices assume pre-1960 homes, and its hall-bath budget sets aside $0–$3,000 to demolish a mud-set tile floor and wainscot, $0–$3,000 to remove and reset a radiator, and $0–$2,000 for difficult access such as a condo or third floor. Ask whether each quote covers them.

Time differs too. Precision Tiling says its tub-to-shower conversions “often finish faster than our 3-week standard,” while Castle puts a complete gut remodel at about 10–13 weeks.

Watch out: In a home built before 1978, tearing out a tub surround or plaster wall can disturb lead paint. Firms paid to do that work generally need to be EPA-certified. Ask for the firm’s certification and check it in EPA’s certified-firm search before demolition starts. A qualifying lead-free determination can exclude the affected components.

Curb, low-threshold or curbless: what each entry costs

The entry you choose can change the floor framing, the drain and the budget, not just the look.

Entry type How it’s built Cost signal Main watch-out
Curb (dam) Raised lip holds water in; works with prefab bases and tiled pans Fits replacement-tier budgets A step over the curb
Low-threshold base Prefab or tiled base with a reduced lip No local published figure; depends on the product Glass and slope must keep water in
Curbless (zero-entry) Shower floor sits below the room floor, or the rest of the room is built up; point or linear drain Precision Tiling: inside its $35,000–$60,000 and $60,000–$90,000+ tiers Framing changes, building permit, water at the entry

Source: Precision Tiling; Schluter Systems (accessed October 2026).

What a curbless shower needs structurally

The finished shower floor has to slope to the drain, so in a curbless shower that slope must start below the bathroom floor. Schluter Systems, a waterproofing manufacturer, describes one wood-framed approach: the shower area of the subfloor is “lowered, or recessed,” so the bathroom floor can stay at its existing height. Its KERDI-SHOWER-FRS bracket system, announced Sept. 1, 2026, supports a recessed subfloor “without cutting or modifying structural floor joists.” It works with dimensional lumber or I-joists spaced up to 19.2 inches on center. The bracket system is built around a center point drain; for a linear drain, Schluter points to its other curbless methods: a shower tray with a ramp, or building up the rest of the bathroom floor, which raises the floor at the door. Another route changes the floor framing itself, which is structural work (Blaine, for example, covers new framing under its remodel permit and inspects framing before drywall).

Drain choice follows. Schluter notes that a center point drain slopes the floor “from all directions rather than on a single plane.” A linear drain along one wall lets the floor slope one way, which suits large tiles and a flat, level entry. On a basement slab, recessing means cutting concrete around the drain. For a whole-room cost picture, start with our bathroom remodel costs and calculator.

Shower glass options and prices

Glass is often the last big line item. HomeAdvisor’s national ranges:

Glass type National range Typical
Framed enclosure $350–$830 about $590
Semi-frameless $820–$2,000 about $1,400
Frameless $1,000–$3,300 about $2,000

Source: HomeAdvisor, shower remodel cost, national figures updated June 19, 2026 (accessed October 2026).

Locally, Castle’s hall-bath budget sets aside $0–$5,000 to add a shower door or enclosure. Precision Tiling lists “Glass + lighting” in its $20,000–$32,000 refresh tier and “Frameless glass” in its $35,000–$60,000 primary-bath tier. A fixed panel with an open end skips the door. The shower then needs enough length to keep spray inside, so settle that before the drain location is fixed.

Walk-in shower conversion cost in Minnesota: permits and inspections

Minnesota’s building code exempts tiling and similar finish work from a building permit. It also says “unless otherwise exempted, plumbing, electrical, and mechanical permits are required” (Minn. R. 1300.0120). Here is how four cities handle a shower swap; framing changes add building-permit work.

  • Minneapolis requires a permit to “Replace or install fixtures, like sinks, showers and tubs.” Owner-occupants of single-family homes may do their own plumbing.
  • St. Paul requires a plumbing permit to “install new, alter, replace, repair, relocate, reinstall, or change” piping. Licensed plumbing contractors or homesteading homeowners can pull it (city page).
  • Burnsville requires a plumbing permit when replacing a fixture “breaks the seal” on the drain, including showers and tubs.
  • Blaine has a bathroom project page listing a plumbing rough-in inspection before piping is covered, a framing inspection, and a mechanical permit for the bath fan and duct. It notes that electrical permits are “issued by the State of Minnesota.”

For scale, the median total fee on Minneapolis tub-and-shower-only building permits was $278 (2023–2026), and on bathroom-remodel building permits $472. A shower-only job may need just a plumbing permit. Our permit guide covers other cities.

Local note: Blaine lists a shower-pan inspection for tiled showers. Site-built shower pans “must be watertight and flood tested,” and the test “must be witnessed by the Plumbing Inspector.” If your city doesn’t require one, ask your installer to flood test anyway before tile goes on.

How to keep a walk-in shower from leaking

Tile and grout are not the waterproofing. The layer under them is. Minnesota’s plumbing code is based on the 2018 Uniform Plumbing Code with state amendments. Unless the shower floor is poured on the ground as part of a slab, it needs an approved liner that runs up the walls “not less than 3 inches” above the top of the finished dam or threshold (Minn. R. 4714.0408). Tiled showers use one of three approaches:

  1. Mortar bed over a liner. The code allows “sheet plastic, lead, or copper” or another durable, watertight material for the liner.
  2. Bonded sheet membrane. Schluter-KERDI, for example, is a sheet with a polyethylene core and fleece on both sides. It is pressed into thin-set mortar, and tile is set directly on it. Schluter lists an ICC-ES evaluation (ESR-2467) and a cUPC listing for it.
  3. Liquid-applied membrane. Custom Building Products’ RedGard, for example, is rolled on. The maker says it is listed with IAPMO as a shower pan liner meeting ANSI A118.10 when used for that purpose.

Whichever method you choose, it should be installed to the maker’s instructions. The details to check are the transitions: the drain, niches, benches and the entry. A curbless entry has no dam, so ask how the waterproofing and slope will keep water in the shower and how the installer will show it to the inspector. Prefab units avoid grout lines, but the drain connection and the joint between panels and base still need care.

Heated floor and ventilation add-ons

Heated floor. Castle budgets $0–$3,000 to add a heated floor and extra lighting in a hall bath ($0–$5,000 in a primary bath). Precision Tiling says heated floors “typically add $2,500 to $5,500 inside a full remodel.” Electric floor heat is electrical work, so it needs an electrical permit. See our heated floor cost guide.

Ventilation. An open walk-in shower lets steam reach the whole room, so the fan matters. Minnesota’s residential code requires an openable window or a fan vented outdoors; Blaine’s page adds that the duct be insulated for at least 3 feet from the exterior wall. In St. Paul permit data (2023 to June 30, 2025, when the city’s open data ends), 57% of bathroom-remodel permits that list trade permits included a ventilation permit. Our exhaust fan guide covers sizing.

Walk-in showers built for easier access

A curbless entry, a bench, a handheld shower and wall blocking for future grab bars can all be part of a shower-only project. A full accessible room is a different budget. Remodeling/JLC’s Cost vs. Value 2025 put a universal-design bath remodel in Minneapolis at $43,965, with an estimated resale value of $26,800, or 61% of cost, as reported by HomeBuildersMN.com.

For financing, Minnesota Housing’s Fix Up program includes a secured Accessibility Loan of up to $35,000 with no listed income limit (confirm eligibility with a participating lender). Eligible items include “bathroom fixture modifications” according to Minnesota Housing’s Fix Up program sheet. See our accessible bathroom guide and financing guide.

Why quotes for the same shower differ

  • Footprint: staying inside the old tub alcove, as in Castle’s conversion example, vs. moving walls or the drain.
  • Build: prefab panels vs. tile, plus tile size, niches and benches.
  • Entry: curb, low threshold or curbless.
  • Glass: framed, semi-frameless or frameless.
  • House: mud-set tile, radiators and pre-1978 paint in older homes.
  • Who you hire: a bath-system company, a tile firm or a design-build remodeler.

Next steps

Before you compare written quotes, make sure each names the waterproofing system, flood test, drain type, glass, fan and permits; our quote checklist lists the rest.

Keep planning

Describe your bathroom project and build a scope checklist to take to a contractor.

Frequently asked questions

How much does a walk-in shower cost in Minnesota?

In the Twin Cities, Precision Tiling publishes $12,000 to about $20,000 for a tiled shower replacement and $18,000–$28,000 for a standalone custom tiled shower. HomeAdvisor’s national range for a walk-in shower is much lower at $1,500–$8,000, so check what each figure includes before you compare.

How much more does a curbless shower cost than one with a curb?

None of the Twin Cities firms we checked publishes a separate curbless add-on price. Precision Tiling calls curbless work “engineering plus finish” and places it inside its $35,000–$60,000 primary-bath and $60,000–$90,000+ spa tiers. The floor usually has to be recessed or the rest of the room raised.

Do I need a permit to convert a tub to a walk-in shower?

Usually you need at least a plumbing permit. Minneapolis requires a permit to replace or install showers and tubs, and Burnsville requires one when the swap breaks the seal on the drain. Changing floor framing for a curbless shower adds building-permit work.

Should I choose a prefab or a tiled walk-in shower?

Prefab bases and wall panels take less labor but come in set sizes and finishes. Tile allows any size, a niche, a bench or a curbless entry. It also needs a site-built waterproofing layer and far more labor: Castle’s FAQ puts tile work for a bathroom floor plus shower at over 100 hours.

How do I make sure a tiled walk-in shower won’t leak?

Ask which waterproofing system goes under the tile: a liner under a mortar bed, a bonded sheet membrane, or a liquid-applied membrane. Confirm it is installed to the maker’s instructions, and ask for a flood test before tile. Blaine requires that test on site-built pans, with the plumbing inspector present.

Sources

  1. Bathroom Remodel Cost St. Paul MN: 2026 Price Bands (opens in a new tab) — Precision Tiling. Accessed . Page marked “Updated August 2026”. Shower replacement, custom shower, conversion, curbless and heated-floor figures.
  2. 2026 Twin Cities Remodeling Cost Guide (opens in a new tab) — Castle Building & Remodeling. Accessed . Bathtub conversion to shower p. 16; hall-bath line items p. 14 (mud-set demo, radiator, access, shower door or enclosure, heated floor); primary-bath heated floor line p. 18; FAQ p. 21. Prices assume pre-1960 homes and average finishes.
  3. CCS_Permits (building permit open data) (opens in a new tab) — City of Minneapolis. Accessed . PermitPriced analysis of 1–3 family bathroom building permits, January 2023 to October 9, 2026; declared valuations, not contract prices.
  4. Approved Building Permits (opens in a new tab) — City of Saint Paul. Accessed . PermitPriced analysis of St. Paul single-family, duplex and townhouse bathroom building permits; data ends June 30, 2025.
  5. How Much Does a Shower Remodel Cost? (opens in a new tab) — HomeAdvisor. Accessed . National figures; page updated June 19, 2026. Walk-in shower range and glass enclosure ranges.
  6. Cost to Remodel a House in Minnesota (reporting the 2025 Cost vs. Value Report, Minneapolis) (opens in a new tab) — HomeBuildersMN.com. Accessed . Reports Remodeling/JLC Cost vs. Value 2025 figures for Minneapolis, including the universal-design bath remodel.
  7. Minnesota Rules 1300.0120, Permits (opens in a new tab) — Minnesota Office of the Revisor of Statutes. Accessed .
  8. Minnesota Rules 1300.0160, Fees (opens in a new tab) — Minnesota Office of the Revisor of Statutes. Accessed . Building permit valuation is set by the building official.
  9. Minnesota Rules 4714.0408, Shower receptor linings (UPC 408.7 amendment) (opens in a new tab) — Minnesota Office of the Revisor of Statutes. Accessed .
  10. Minnesota Rules 4714.0050, Incorporation of the 2018 Uniform Plumbing Code (opens in a new tab) — Minnesota Office of the Revisor of Statutes. Accessed .
  11. Plumbing permits (opens in a new tab) — City of Minneapolis. Accessed .
  12. Plumbing and Gas (opens in a new tab) — City of Saint Paul. Accessed .
  13. Plumbing Permit (opens in a new tab) — City of Burnsville. Accessed .
  14. Bathroom Project (opens in a new tab) — City of Blaine. Accessed . Permits, shower-pan flood test, inspection sequence, ventilation and duct insulation.
  15. Recessing the Shower Floor (opens in a new tab) — Schluter Systems. Accessed .
  16. Schluter Expands Curbless Shower Solutions with KERDI-SHOWER-FRS (opens in a new tab) — Schluter Systems. Accessed . Press release dated Sept. 1, 2026.
  17. Schluter-KERDI product page (opens in a new tab) — Schluter Systems. Accessed .
  18. RedGard Waterproofing and Crack Prevention Membrane (opens in a new tab) — Custom Building Products. Accessed .
  19. Lead Renovation, Repair and Painting Program Rules (opens in a new tab) — U.S. Environmental Protection Agency. Accessed .
  20. Locate Certified Renovation and Lead Dust Sampling Technician Firms (opens in a new tab) — U.S. Environmental Protection Agency. Accessed .
  21. Fix Up Loan Program sheet (05/01/2025) (opens in a new tab) — Minnesota Housing. Accessed .

Our guides are written independently, and we don’t rank remodelers. How we research.

Free tool

Bathroom remodel cost calculator

Get a range for a full remodel or a shower or tub replacement with tiled walls. Other projects, such as replacing an acrylic or panel system on its own, get a checklist.