One-day bath remodel cost vs. a full tiled remodel
Key takeaways
- Re-Bath’s national guide puts walk-in shower installations at $4,000 to $15,000 or more; in the east metro, Precision Tiling lists a like-for-like shower or tub rebuild at $12,000 to about $20,000. National and local figures aren’t directly comparable.
- Castle’s 2026 guide names labor as the main reason tile is expensive: a bathroom floor and shower take over 100 hours of tile work.
- An overlay goes over the old tub and walls in about a day. By itself it doesn’t fix rot, leaks or a layout you want to change, and Minnesota’s statutory home improvement warranties don’t cover defects in the existing structure and systems that the new work didn’t cause.
- Minneapolis building permits for tub-and-shower-only jobs had a median declared permit value of $7,322 (178 permits, 2023 to October 9, 2026). That is a valuation for permit fees, not a contract price.
- If you sign at home, Minnesota law generally lets you cancel a sale over $25 until midnight of the third business day after the sale (Minn. Stat. 325G.07), and Saturdays do not count as business days.
A one-day bath system is a smaller job than a tiled remodel of the same tub or shower, but bath-system companies don’t publish local prices, so there is no like-for-like local comparison. At the high end of tiled work, Castle Building & Remodeling’s 2026 Twin Cities cost guide prices a design-build tub-to-shower conversion at $30,171–$34,697. The more useful question is whether the floor, walls and plumbing behind your tub are sound enough to cover over.
One caution: Castle is a design-build firm whose prices assume pre-1960 homes, so its figure is one firm’s price for that scope, not a typical quote.
What is a one-day bath remodel?
“One-day” is a sales term for prefabricated tub and shower systems: acrylic or solid-surface tubs, shower bases and wall panels, made to fit and sold by franchise and regional bath companies. In practice you’ll be comparing three different jobs, and a quote doesn’t always say which one you’re buying.
- Overlay (liner). A custom-molded acrylic tub liner and wall panels go over the existing tub and walls. Bath Fitter describes its liners and walls as installed right over the existing bath and wall, and its pricing page says its bathtub and its walls each install in one day. The wall behind is normally left closed; Bath Fitter says damaged wall areas are repaired first.
- Tear-out system. The old tub or shower is removed, and a new acrylic or solid-surface tub or base and panel walls go in. Re-Bath’s walk-in shower guide describes this process, and West Shore Home says its walk-in shower installs take “a few short days.” With the wall open, the plumbing can be adjusted.
- Tiled remodel. A general or design-build remodeler strips the wet area, or the whole room, to the studs. Then come a waterproofing layer, tile, glass and often a new shower valve. Castle’s guide puts tile labor for a bathroom floor plus a shower at “over 100 hours.”
So the choice comes down to which of these three jobs your bathroom needs.
Acrylic shower vs. tile cost: published ranges side by side
| Job | Published price | Published time | What’s usually included |
|---|---|---|---|
| Acrylic overlay (liner) | Not published; quoted at an in-home visit (Bath Fitter) | One day (Bath Fitter) | Liner and panels over the existing tub and walls |
| Acrylic or solid-surface system, tear-out | $4,000–$15,000+ for a walk-in shower install (Re-Bath, national) | Days, not weeks (Re-Bath); a few days (West Shore Home) | Old tub or shower removed; new tub or base, panel walls, plumbing adjustments |
| Tiled shower or tub rebuild, same footprint | $12,000 to about $20,000; Precision Tiling (Oakdale) | Not published; get a written schedule | Like-for-like rebuild; tile and glass choices drive the price |
| Tub-to-shower conversion, design-build firm | $30,171–$34,697 (Castle) | Not published | Tub area only; floor, walls, vanity and toilet unchanged |
| Whole-room gut remodel, 40 sq ft | $45,708–$52,678 (Castle) | About 10–13 weeks (Castle) | Room to studs, all fixtures and finishes |
Source: company pages listed below and Castle Building & Remodeling, 2026 Twin Cities Remodeling Cost Guide (accessed October 2026). National and local ranges are not directly comparable.
Castle’s guide names labor as the main reason tile is expensive. A tiled shower adds demolition to the studs, a waterproofing membrane, hand-set tile and grout, and often a new valve and glass door.
One-day bath remodel in Minneapolis and St. Paul: what permits show
| City and job type | Permits | Median declared permit value | Middle half |
|---|---|---|---|
| Minneapolis, tub/shower work only (2023–October 2026) | 178 | $7,322 | $4,926–$12,845 |
| Minneapolis, bathroom remodel (2023–October 2026) | 1,434 | $13,000 | $7,458–$23,980 |
| St. Paul, tub/shower work only (2023–June 30, 2025) | 138 | $9,000 | $6,422–$12,647 |
| St. Paul, bathroom remodel (2023–June 30, 2025) | 478 | $15,000 | $9,100–$25,000 |
Source: PermitPriced analysis of City of Minneapolis (through October 9, 2026) and City of Saint Paul (through June 30, 2025) open permit data (accessed October 2026). Declared values are valuations for permit fees, not contract prices.
“Tub/shower work only” means permits whose description covers tub or shower work with fewer than two other substantial items, or says the scope is limited to the wet area. The category does not separate acrylic systems from tiled work, and a swap that pulls only a plumbing permit, or none, isn’t counted. See our permit data and methodology for how we classify permits.
How much is Bath Fitter or Re-Bath in MN?
Neither company publishes local prices on the pages we checked; both quote at a free in-home consultation. Bath Fitter’s pricing page names what moves its price:
- the size, shape and material of your current tub or shower
- the products and features you choose, including safety accessories
- any repairs needed before installation
Re-Bath’s national walk-in shower guide gives a range of $4,000 to $15,000 or more, depending on complexity and location. Treat any figure that isn’t a written quote for your own bathroom as a rough guide. The written quote is the number to budget from.
What can’t an overlay fix?
An overlay covers the old surface; by itself it doesn’t repair what’s under it. Bath Fitter’s pricing page says damaged wall areas are repaired before installation and that its PermaFit bathtub can’t cover a jetted tub, and its pricing article lists damaged areas and “what’s behind your bathroom walls” as price factors. These problems call for opening the wall or floor:
- rot or soft subfloor around the tub
- leaks at the drain, overflow, supply lines or shower valve
- crumbling plaster, loose tile or soft drywall around the tub
- mold behind the surround
- a layout change, such as moving the drain, a larger shower, a bench or niche, or a curbless entry
- an old shower valve you want replaced, which requires access through the wall
Local note: More than half of owner-occupied homes in Minneapolis (57%) and St. Paul (53%) were built in 1939 or earlier (Census ACS 2020–2024). For houses of that age, Castle’s 2026 guide budgets $0–$3,000 to demolish mud-set floor and wainscot tile in an older hall bath and $0–$3,000 to remove and reset a radiator. Firms paid to disturb painted surfaces in pre-1978 homes generally need EPA certification. See EPA coverage and exceptions before demolition.
More in our old-house bathroom guide.
Durability, cleaning and choice
- Acrylic or solid-surface panels have few seams and no grout lines, and they wipe clean. Choices are limited to the maker’s colors, patterns and sizes, and an overlay keeps your current tub’s shape.
- Tile allows any size, layout, niche, bench or curbless entry. Grout lines need the most upkeep. A tiled shower depends on the waterproofing under the tile, which you can’t see afterward, so ask which membrane the remodeler uses and whether the city inspects it. Blaine, for example, lists a shower-pan inspection for tiled showers.
- Either way, ventilation matters in a Minnesota winter. See our exhaust fan guide.
Warranties: what the paper covers
Read three parts of any warranty separately.
- Product. This covers defects in the panels or tub. Bath Fitter’s pricing page says its acrylic liners, walls and accessories are covered for life against manufacturing defects, “subject to limitations.”
- Workmanship. This covers installation errors, such as leaks at seams or the drain. Ask whether it is separate from the product warranty, how long it lasts and who honors it: the local franchise, the dealer or the manufacturer.
- Transfer. Re-Bath’s Minneapolis page mentions a one-time warranty transfer and says terms vary by product.
Minnesota law adds warranties of its own to home improvement work (Minn. Stat. 327A.02, subd. 3). Which one applies depends on the kind of work. Each runs from the warranty date and covers defects due to noncompliance with building standards:
- work that installs plumbing, electrical, heating or cooling systems: two years against defects caused by faulty installation of those systems
- work involving major structural changes or additions: one year against faulty workmanship and defective materials, and 10 years against major construction defects
- any other home improvement work: one year against faulty workmanship or defective materials
These warranties can be changed only after the contract is signed, in a bold-type document you sign, and only if the contractor gives substitute warranties offering substantially the same protection (Minn. Stat. 327A.04). Exclusions include defects in the existing structure and systems that the work didn’t cause, and dampness and condensation from insufficient ventilation after occupancy. You also generally must report a problem in writing within six months of finding it (Minn. Stat. 327A.03). That first exclusion matters for overlays: if a liner covers an existing problem, the statutory warranty won’t.
In-home sales visits and same-day prices
Bath-system companies, and many remodelers, price the job during an in-home consultation. Some visits end with a discount that holds only if you sign that day. That’s a common closing practice, not proof the price is unfair, but test it:
- Ask for the written price with and without the discount, and how long each is good. West Shore Home, for one, says its up-front quote is good for up to a year.
- Get at least one comparison quote for the same scope. Overlay vs. tear-out can change the price a lot.
- Ask what’s excluded: permits, rot repair, valve replacement, disposal.
Your right to cancel in Minnesota. Minn. Stat. 325G.06–325G.09 cover home solicitation sales: sales of goods, services or improvements to real property over $25 that the seller personally solicits, where you agree away from the seller’s place of business. Your kitchen table counts.
- You can cancel until midnight of the third business day after the sale. Saturdays, Sundays and holidays don’t count as business days.
- Cancel by written notice to the address in the agreement. Mailed notice takes effect when you drop it in the mailbox.
- The seller must tell you about this right out loud and give you a “Notice of Cancellation” form in duplicate. Until it does, you can still cancel.
- The seller has 10 days to return your payments, and it gets nothing for services performed before you canceled.
The federal FTC Cooling-Off Rule gives a similar three-business-day window, but it counts Saturdays as business days.
Watch out: The reason for the visit matters. If you specifically request a repair or maintenance visit, Minnesota excludes that work, but the exclusion generally does not extend to extra goods or services sold during the visit. If you invite the seller to negotiate a particular remodel purchase, that separate exclusion requires a dated, signed waiver in your own handwriting. Minn. Stat. 325G.06, subd. 2 also lists conditions for an emergency repair.
When each option makes sense
A bath system (overlay or tear-out) fits when:
- the tub, floor and walls are solid, with no leaks or soft spots
- you’re keeping the same layout and size
- downtime matters, for example in a one-bathroom house
- you want panels with no grout lines
An overlay in particular needs a sound tub underneath.
A tiled remodel fits when:
- there is water damage, a leak or failing tile
- you want a different size, a curbless entry, a bench, a niche or a moved valve
- the floor, vanity, fan and wiring are also due, in which case compare against a whole-room bathroom remodel cost
A tear-out system sits in between. It opens the wall so leaks and rot can be dealt with, and it still finishes in days.
Questions to ask before you sign
- Is this an overlay or a full tear-out? What exactly comes out?
- If you find rot or water damage, how is the repair priced? Get the unit price in writing.
- Is the shower valve replaced, and with what?
- Which permits are included, and who pulls them? Minneapolis requires a plumbing permit to replace or install showers and tubs.
- What is your Minnesota license number? Check it on the DLI lookup; “IR” numbers are registrations, not licenses.
- My house was built before 1978. Is your firm EPA lead-safe certified?
- Does the warranty cover the product, the labor or both? Can it be transferred, and who honors it?
- How long is this price good, and what is it without today’s discount?
Next steps
To compare tub-to-shower options, see tub-to-shower conversion cost.
Keep planning
Describe your bathroom project and build a scope checklist to take to a contractor.
Frequently asked questions
How much does a one-day bath remodel cost in Minneapolis?
Bath-system companies quote after an in-home visit rather than publishing local prices, so there is no published Twin Cities figure to give you. City permit records don’t fill the gap: their declared values are valuations for permit fees, they don’t separate system installs from tiled work, and a swap that pulls no building permit isn’t in them. Get two in-home quotes on the same written scope.
Is an acrylic shower cheaper than tile?
Local figures can’t settle it: no bath-system company publishes Twin Cities prices, and national and local ranges aren’t directly comparable. Re-Bath’s national guide puts walk-in shower installations at $4,000 to $15,000 or more. Locally, Precision Tiling lists a like-for-like shower or tub rebuild at $12,000 to about $20,000 depending on tile and glass, and Castle’s guide prices a design-build tub-to-shower conversion at $30,171–$34,697.
Does a bath liner go over my old tub?
It depends on the company. Bath Fitter says its liners and walls install over the existing bath and wall, while Re-Bath’s walk-in shower guide describes removing the old tub or shower first. Ask which method your quote uses, because an overlay leaves the tub, floor and wall underneath in place.
Can I cancel a bath remodel contract I signed at home in Minnesota?
Usually, yes. Minn. Stat. 325G.07 lets you cancel a home solicitation sale over $25 until midnight of the third business day after the sale, by written notice to the seller’s address in the agreement. The seller must return your payments within 10 days (Minn. Stat. 325G.09).
Do I need a permit for a tub or shower replacement in Minneapolis?
Minneapolis requires a plumbing permit to replace or install fixtures such as showers and tubs. Ask each installer which permits are included in the price and who will pull them.
Sources
- CCS_Permits (building permit open data) (opens in a new tab) — City of Minneapolis.
- Approved Building Permits (opens in a new tab) — City of Saint Paul.
- 2026 Twin Cities Remodeling Cost Guide (opens in a new tab) — Castle Building & Remodeling.
- Bathroom Remodel Cost St. Paul MN: 2026 Price Bands (opens in a new tab) — Precision Tiling.
- Bath Fitter Pricing (opens in a new tab) — Bath Fitter.
- What’s in the Price of a Bathroom Remodel? (opens in a new tab) — Bath Fitter.
- Walk-In Shower Installation Costs & Timing (opens in a new tab) — Re-Bath.
- Bathroom Remodeling in Minneapolis (opens in a new tab) — Re-Bath.
- Walk-In Shower Replacement (opens in a new tab) — West Shore Home.
- Minnesota Statutes 325G.06, Home Solicitation Sales: Definitions (opens in a new tab) — Minnesota Office of the Revisor of Statutes.
- Minnesota Statutes 325G.07, Buyer’s Right to Cancel (opens in a new tab) — Minnesota Office of the Revisor of Statutes.
- Minnesota Statutes 325G.08, Notice of Cancellation (opens in a new tab) — Minnesota Office of the Revisor of Statutes.
- Minnesota Statutes 325G.09, Return of Payments (opens in a new tab) — Minnesota Office of the Revisor of Statutes.
- 16 CFR Part 429, Cooling-Off Period for Sales Made at Homes or Certain Other Locations (opens in a new tab) — Federal Trade Commission.
- Minnesota Statutes 327A.02, Statutory warranties (opens in a new tab) — Minnesota Office of the Revisor of Statutes.
- Minnesota Statutes 327A.03, Exclusions (opens in a new tab) — Minnesota Office of the Revisor of Statutes.
- Minnesota Statutes 327A.04, Waiver and Modification Limited (opens in a new tab) — Minnesota Office of the Revisor of Statutes.
- Plumbing permits (opens in a new tab) — City of Minneapolis.
- Bathroom Project (opens in a new tab) — City of Blaine.
- Lead Renovation, Repair and Painting Program Rules (opens in a new tab) — U.S. Environmental Protection Agency.
- License and Registration Lookup (opens in a new tab) — Minnesota Department of Labor and Industry.
- ACS 2020–2024 5-year, table B25036 (tenure by year structure built), Minneapolis and St. Paul (opens in a new tab) — Census Reporter (U.S. Census Bureau data).
Our guides are written independently, and we don’t rank remodelers. How we research.